Viofo A229 Parking Mode Not Working: Troubleshooting Guide

TL;DR: If your Viofo A229 parking mode is not working, check your power supply setup, ensure the correct parking mode settings are enabled, and verify the use of a compatible hardwire or battery pack. Proper installation and firmware updates often resolve most issues.

Top picks for viofo-a229

We may earn a commission if you buy through our links, at no extra cost to you.

Best Pick

Viofo A229

$474.99

Dash Cam with Dual STARVIS 2 Sensors.

Check Latest Price See More Picks

Quick overview

• The Viofo A229 supports several parking mode options including motion detection, time lapse, and impact detection.
• Parking mode requires a constant power source, typically via a hardwire kit or an external battery pack.
• Incorrect settings or installation can cause parking mode to fail, especially in cold Canadian winters or hot summers.

What to look for in Canada

Canadian drivers face unique challenges with dashcams like the Viofo A229 due to extreme temperatures and varying power supply needs. The A229’s parking mode relies heavily on a stable power source after the ignition is off. Many users install a hardwire kit that taps into the vehicle’s fuse box with a low-voltage cutoff feature to protect the car battery. This prevents discharging during cold starts and extended parking periods.

When setting up parking mode, ensure that:

• The hardwire kit used is compatible with the Viofo A229 and supports constant and switched power lines.
• Low voltage cutoff is appropriately configured to avoid battery drain or shutdown problems in sub-zero temperatures.
• You have updated the dashcam firmware to the latest version, as this often resolves stability issues with parking mode.

Cold weather can affect battery performance both in your vehicle and any external battery packs used to power the dashcam when parked. Always ensure your dashcam’s parking mode settings match your installation method. For example, if you're using the internal battery only, parking mode will be limited to a short period due to battery capacity.

Additionally, heat tolerance is a consideration if you live in warmer parts of Canada or park in direct sunlight. The Viofo A229 is designed to operate within typical automotive temperature ranges, but extreme heat can cause temporary malfunctions or shutdowns. Consider shaded parking or a heat-resistant mount if possible.

My recommendation

If you regularly park your car for hours and want comprehensive surveillance while parked, investing in a good quality hardwire kit with a battery protection feature is essential for the Viofo A229. Ideal kits provide constant power while preventing your vehicle battery from draining below a safe level. This is particularly valuable for Canadian winters when your car battery may already be stressed.

For buyers who prefer a simpler setup or rent vehicles, an external battery pack designed for dashcams can be a practical alternative. It allows the Viofo A229 to operate parking mode without tapping into the vehicle’s power system. However, remember that battery packs need recharging after extended use, so consider your daily parking duration.

Always download and install the latest firmware from Viofo’s official site before troubleshooting or finalizing your setup. Firmware updates frequently improve stability and parking mode behavior.