← Back to Blog
Falcon 1 Not Recording: Troubleshooting Checklist

Falcon 1 Not Recording: Troubleshooting Checklist

🏆 Best Overall Pick

Falcon 1 Not Recording: Troubleshooting Checklist is one of the strongest starting points for Canadian dashcam buyers.

This is one of the top-rated dashcams for Canadian drivers. Prices change frequently — check the latest deal below.

Check today’s price before it changes: Check Latest Price

Check Latest Price

Choose by need

Category: dashcams • Type: fix • Updated: 2026-07-26
[[falcon-1]]

TL;DR: If your Falcon 1 dashcam isn’t recording, check the SD card, power connections, and settings first. Most issues are easily resolved by ensuring proper installation and using a compatible memory card.

Top picks for falcon-1
We may earn a commission if you buy through our links, at no extra cost to you.

Quick overview

  • Verify the microSD card is properly inserted, formatted, and has enough free space.
  • Check that the Falcon 1 is receiving continuous power, especially if parking mode is enabled.
  • Review the recording settings to ensure event and loop recording are activated.

What to look for in Canada

In Canadian climates, especially through winter, your Falcon 1’s performance can be affected by temperature extremes. Cold starts in sub-zero temperatures may cause delays in the camera powering up or even cause the device to skip recording events temporarily. Heat in summer can similarly impact the dashcam’s electronics, so mount it in a shaded spot if possible.

Parking mode recording is a popular feature for security while your vehicle is off, but it requires constant low power supply. If your Falcon 1 isn’t recording while parked, ensure that your vehicle’s accessory power outlet or hardwire kit supports constant power rather than shutting off with the ignition.

Since the Falcon 1 relies heavily on the microSD card for recording, use cards rated for high endurance to withstand Canadian temperature fluctuations and frequent write cycles. Format the card in the dashcam itself or using the recommended file system (usually FAT32 or exFAT) to avoid compatibility issues.

My recommendation

For Canadian drivers seeking everyday reliability and peace of mind, the Falcon 1 offers solid recording features suitable for daily commutes and occasional road trips. To minimize recording issues, pair your Falcon 1 with a high-quality, high-endurance microSD card (at least Class 10 U3). Buyers who want uninterrupted recording, especially for parking mode, should strongly consider installing a compatible hardwire kit that ensures the dashcam has constant power without draining the car battery.

Those living in regions with harsh winters or hot summers should pay extra attention to installation location — avoid direct sunlight through the windshield or placing the unit where temperatures fluctuate dramatically. Proper setup and maintenance will provide the most consistent recording experience with the Falcon 1.

Does this work in winter?

Yes, the Falcon 1 works through Canadian winters but may take longer to start recording in extreme cold. Make sure the camera is installed away from direct cold drafts and consider a hardwire kit to maintain power during parking mode in freezing temperatures.

Do I need a hardwire kit?

A hardwire kit is recommended if you want your Falcon 1 to record while parked or need the camera to remain powered independently of the vehicle’s ignition. It prevents battery drain by drawing low current and ensures parking mode features work reliably.

Need a faster answer?
Browse the best dashcams, budget picks, or compare pages to narrow your choice.
Top picks for falcon-1
We may earn a commission if you buy through our links, at no extra cost to you.

Related Articles

Recommended next pages

Ready to compare prices?

Before you choose, check current availability and pricing. Dashcam prices can change often, especially during sales.

Check Latest Price
Ready to buy?Check Latest Price